Filter
Top Products
Chapter 4 Installation and Setup
32 P332G-ML User’s Guide
Configuring the Switch
The P332G-ML may be configured using the text-based CLI, the P330 Embedded
Web Manager or Avaya Multi-Service Network Manager.
For instructions on the text-based CLI, refer to Chapter 4, Cajun Campus CLI –
Layer 2.
For instructions on installation of the Graphical User Interfaces (GUI), refer to
Appendix A, P330 Embedded Web Manager. For instructions on the use of the
graphical user interfaces, refer to the Device Manager User’s Guide on the
Documentation and Utilities CD.
P332G-ML Default Settings
The default settings for the P332G-ML switch and its ports are determined by the
P330 software. These default settings are subject to change in newer versions of the
P330 software.
Table 4.1 Default Switch Settings
Function Default Setting
IP Address 149.49.35.214
Subnet Mask 255.255.255.0
Default gateway 0.0.0.0
Management VLAN ID 1
Spanning tree Enabled
Bridge priority for Spanning
Tree
32768
Keep alive frame transmission Enabled
Network time acquisition Enabled, TIME protocol
TIME server IP address 0.0.0.0
Timezone offset 0 hours
SNMP Communities
Read-Only
Read-Write
Traps
Public
Public
Public
SNMP retries number 3