Filter
Top Products
Chapter 6 CLI – Layer 3
P332G-ML User’s Guide 171
show ip vrrp detail Command
Use the show ip vrrp detail command to display full VRRP-related
information
The syntax for this command is:
show ip vrrp detail
Output Example:
Router-1> show ip vrrp detail
VRRP is globally enabled
Virtual Router on VLAN: 1
Router-id: 1
State: MASTER
Priority: 255
Advertisement Interval: 1
Last State Change: 00:00:00
Override Address Ownership Rule: No
Authentication Type: None
Authentication Key: ""
Master IP Address 192.168.66.23
Has 1 IP addresses
IP addresses:
192.168.66.23
Primary IP Address: 192.168.66.23
Primary IP Address was chosen by default
Preemption Mode: enabled
# of times Master: 2
# of received Advertisements: 0
# of transmitted Advertisements: 20
# of received Advertisements with Security Violations: 0
Virtual Router on VLAN: 1
Router-id: 2
State: BACKUP
Priority: 100
Advertisement Interval: 1
Last State Change: 00:00:00
Override Address Ownership Rule: No
Authentication Type: None
Authentication Key: ""
detail Show full detail information