Filter
Top Products
Chapter 5 CLI – Layer 2
58 P332G-ML User’s Guide
Show module Command
Use the show module command to display module status and information. For
each module with an expansion sub-module installed, both module and sub-
module type and information are shown.
The syntax for this command is:
show module [<mod_num>]
Mod Type C/S S/N Statuses
--- ------------------ ---- -------- ----------------------------
1 P332GT-ML 0.0 1234567 PS:Ok Fans:Fail Mode:Layer2
P330MLSTK 1.0 Conn-Up:Ok Conn-Down:Fail
BUPS BUPS:Not Prsnt Fans:None Type:None
2 P333T 1.0 4144162 PS:OK Fans:OK Mode:Layer2
X330GT2 2.0
P330STK 2.0 Conn-Up:Fail Conn-Down:Ok
BUPS BUPS:Not Prsnt Fans:None Type:None
Output Fields
Show port flowcontrol Command
Use the show port flowcontrol command to display per-port status
information related to flow control.
The syntax for this command is:
show port flowcontrol [<mod_num>[/<port_num>]]
mod_num (Optional) Number of the module. If you do not specify a
number, all modules are shown.
Field Description
Mod Module number
Type Module Type/Expansion sub-module type
S/N Serial number of the module
C/S (Hardware) Configuration Symbol of the module/
Expansion sub-module
Statuses Status of the module/submodule