Filter
Top Products
Chapter 6 CLI – Layer 3
136 P332G-ML User’s Guide
copy startup-config tftp Command
Use the copy startup-config tftp command to copy the P332-ML
configuration from the NVRAM Startup Configuration to the TFTP file.
The syntax for this command is:
copy startup-config tftp <filename> <ip>
Example:
Router-N> copy startup-config tftp c:\p332\router1.cfg
192.168.49.10
erase startup-config Command
The erase startup-config command erases the P332-ML module NVRAM
configuration.
The syntax for this command is:
erase startup-config
reset Command
The reset command resets the P332-NL module. This command resets only the
specific module. If the module is the master of the stack the entire stack is reset.
If you want to keep changes you made to the current running configuration use the
copy running-config startup-config command first.
The syntax for this command is:
reset
filename file name (full path)
ip The ip address of the host