Filter
Top Products
Chapter 5 CLI – Layer 2
P332G-ML User’s Guide 47
•show port
flowcontrol
Show port flowcontrol Page 58
• show cam Show CAM Page 59
• show cascading fault-
monitoring
Show cascading fault monitoring mode Page 60
• show spantree Show Spanning Tree Protocol (STP)
setting
Page 62
• show autopartition Shows the autopartition settings. Page 64
• show dev log file Displays the encrypted device log file Page 64
• show log Displays an encrypted device reset log Page 64
•show module-
identity
Displays the module’s identity Page 66
• show license Shows the license Page 66
• show system Show system parameters Page 66
• show rmon statistics Show the traffic statistics of an interface Page 67
• show rmon history Show the existing history entries Page 68
• show rmon alarm Shows the existing alarm entries Page 68
• show rmon event Shows the existing event entries Page 69
• show ppp session Shows the PPP parameters of the active
PPP session
Page 69
• show ppp
authentication
Shows the authentication method used
for PPP sessions
Page 69
• show ppp incoming
timeout
Shows the amount of time PPP sessions
can remain idle before being
disconnected
Page 70
• show ppp baud-rate Shows the baud rate Page 70
• show ppp
configuration
Displays the ppp configuration Page 70
•show tftp upload/
download status
Show status of the TFTP upload/
download configuration per module
Page 71
•show tftp download
software status
Show status of the TFTP software
download of the Device Manager
software to the module
Page 71
• show web
aux-files-url
Show the location (url/directory) of the
P330 Device Manager Help files
Page 72