Filter
Top Products
Chapter 5 CLI – Layer 2
P332G-ML User’s Guide 83
• set interface ppp Configure the device ppp interface Page 91
• set port level Set the priority level of a port Page 93
• set port negotiation Set the auto negotiation mode of a port Page 93
• set port enable Administratively enable a port Page 94
• set port disable Administratively disable a port Page 94
• set port speed Set the speed for a 10/100 port Page 94
• set port duplex Set the duplex mode of a port Page 95
• set port name Assign a name to a port Page 95
• set port trap Enable/Disable the SNMP up/down
link traps sent for port
Page 96
• set port vlan Assign the Port VLAN ID (PVID) Page 96
•set port vlan-binding-
mode
Define the port binding method Page 97
• set port static-vlan Define a multiple VLANs per port Page 97
• set port channel Define a LAG interface Page 98
• set port classification Define port classification Page 98
•set port redundancy
on/off
Define/Delete a link redundancy entry Page 99
• set port redundancy Enables/Disables all the defined link
redundancy schemes
Page 99
• set internal buffering Set internal buffering capacity to
maximum/minimum
Page 100
• set boot bank Configure the boot bank from which the
module will boot
Page 100
• set intermodule port
redundancy
Defines the stack’s unique fast
redundancy scheme
Page 101
• set intermodule port
redundancy off
Clears the intermodule redundancy Page 102
• set port mirror Set a port mirroring source-destination
pair in the stack
Page 102