Filter
Top Products
P332G-ML User’s Guide 19
Chapter 2
Avaya P332G-ML Front and Rear Panels
Avaya P332G-ML Front Panel
The P332G-ML front panel contains LEDs, controls, and connectors. The status
LEDs and control buttons provide at-a-glance information.
The front panel LEDs consist of Port LEDs and Function LEDs. The Port LEDs
display information for each port according to the illuminated function LED. The
function is selected by pressing the left or right button until the desired parameter
LED is illuminated. For example, if the COL LED is illuminated, then all Port LEDs
show the collision status of their respective port. If you want to select the LAG
function, press the right button until the LAG Function LED is lit. If you then want
to select Rx, press the left button several times until the Rx function LED lights.
P332G-ML front panel shown below includes LEDs, buttons, SFP GBIC transceiver
housing ports and the RJ-45 console connector (refer to Figure 2.1 and Figure 2.2).
The LEDs are described in Table 2.1.
Figure 2.1 Avaya P332G-ML Front Panel
Figure 2.2 Avaya P332G-ML LEDs