Filter
Top Products
Chapter 5 CLI – Layer 2
P332G-ML User’s Guide 127
Example:
P330-N(super)# show radius authentication
RADIUS authentication parameters:
---------------------------------
Mode: Enabled
Primary-server: 192.168.42.252
Secondary-server: 192.168.48.134
Retry-number: 4
Retry-time: 5
UDP-port: 1645
Shared-secret: sodot
Set radius authentication Command
Use the set radius authentication command to enable or disable
authentication for the P330 unit. RADIUS authentication is disabled by default.
The syntax for this command is:
set radius authentication [enable|disable]
Tech Command
Use the tech command to enter tech mode. This command is reserved for service
personnel use only.