Filter
Top Products
Chapter 5 CLI – Layer 2
120 P332G-ML User’s Guide
Example:
P330-N# copy tftp stack-config c:\p332ml\switch1.cfg
192.168.49.10
Copy tftp module-config Command
Use the copy tftp module-config command to download the module-level
configuration from a saved file into the current NVRAM running configuration of a
module, via TFTP. To use this command, you need to have an active tftp server, and
to create a file into which to download the data. If Avaya Multi-Service Network
Manager is running, an additional tftp server is not required.
Note: You should perform the nvram initialize command prior to the
copy tftp operation.
The syntax for this command is:
copy tftp module-config <filename> <ip> <mod_num>
Example:
P330-N# copy tftp startup-config c:\p332ml\switch1.cfg
192.168.49.10 5
Copy tftp EW_archive Command
Use the copy tftp EW_archive command to download the P330 Device
Manager application into the module via TFTP. To use this command, you need to
have an active tftp server, and to create a file into which to download the data. If
Avaya Multi-Service Network Manager is running, an additional tftp server is not
required.
The syntax for this command is:
copy tftp EW_archive <filename> <ip> <mod_num>
filename File name (full path)
ip The ip address of the TFTP server
filename Embedded Web Manager image file name (full path)
ip The ip address of the TFTP server
mod_num Target module number