Filter
Top Products
Chapter 5 CLI – Layer 2
122 P332G-ML User’s Guide
Radius Commands
The following radius commands are accessible from Privileged mode.
Set radius authentication secret Command
Use the set radius authentication secret command to enable secret
authentication for the P330 unit.
The syntax for this command is:
set radius authentication secret <string>
string text password
Example:
P330-N(super)# set radius authentication secret sodot
P330-N(super)#
•set radius
authentication secret
Enable secret authentication for the
Avaya P330 unit
Page 122
•set radius
authentication
server
Set a primary or secondary RADIUS
server IP address
Page 123
•clear radius
authentication
server
Remove a primary or secondary
RADIUS authentication server
Page 123
•set radius
authentication retry-
time
Set the time to wait before re-sending an
access request
Page 123
•set radius
authentication retry-
number
Set the number of times an access
request is sent when there is no response
Page 124
•set radius
authentication udp-
port
Set the RFC 2138 approved UDP port
number
Page 124