Filter
Top Products
Chapter 6 CLI – Layer 3
168 P332G-ML User’s Guide
Interface Mode
ip ospf cost Command
Use the ip ospf cost command to configure interface metric. The no form of
this command sets the cost to its default. The default is 1.
The syntax for this command is:
[no] ip ospf cost <cost>
Example:
ip ospf cost 10
ip ospf hello-interval Command
Use the ip ospf hello-interval command to specify the time interval
between hello's the router sends. The no form of this command sets the hello-
interval to its default. The default is 10.
The syntax for this command is:
[no] ip ospf hello-interval <seconds>
Example:
ip ospf hello-interval 5
ip ospf dead-interval Command
Use the ip ospf dead-interval command to configure the interval before
declaring the neighbor as dead. The no form of this command sets the dead-
interval to its default. The default is 40.
The syntax for this command is:
[no] ip ospf dead-interval <seconds>
Example:
ip ospf dead-interval 15
cost integer
seconds integer
seconds integer