Filter
Top Products
Chapter 5 CLI – Layer 2
P332G-ML User’s Guide 53
Show Port Output Fields
Show port trap Command
Use the show port trap command to display information on SNMP generic
link up/down traps sent for a specific port.
The syntax for this command is:
show port trap [<mod_num>[/<port_num>]]
Example:
P330-N> show port trap 1/1
Port 1/1 up/down trap is disabled
Show port channel Command
Use the show port channel command to display Link Aggregation Group
(LAG) information for a specific module or port.
The syntax for this command is:
show port channel [<mod_num>[/<port_num>]]
Field Description
Port Module and port number
Name The name you assigned to the port
Status Status of the port (connected, no link, disabled, no Rmt Lnk)
VLAN VLAN ID of the port
Level Priority level of the port (0-7)
Neg The autonegotiation status of the port (enable, disable)
Duplex Duplex setting for the port (fdx, hdx)
Speed Speed setting for the port (10, 100)
Type Port type, for example, 100BaseT, 1000BaseT, 1000BaseS