Filter
Top Products
Chapter 5 CLI – Layer 2
64 P332G-ML User’s Guide
Show autopartition Command
Use the show autopartition command to display the automatic partition.
The syntax for this command is:
show autopartition [module]
Example:
P330-N> show autopartition 1
Note: Autopartition for the P332G-ML and P332GT-ML will always have the value
disabled. This command is used to display the autopartition status for the other
P330 modules in the stack.
Show dev log file Command
Use the show dev log file command to display the encrypted device’s log file.
The syntax for this command is:
show dev log file
Show log Command
Use the show log command to display an encrypted device’s reset log.
The syntax for this command is:
show log [module]
Example:
P330-1(super)# sh log
MODULE 1, MESSAGE 01:
00000000 0 05002966 0205 0 0 0 0 0 0 0 0 0 0
MODULE 1, MESSAGE 02:
State Spanning-tree port state (disabled, inactive, not-connected,
blocking, listening, learning, forwarding, bridging, or type-
pvid-inconsistent).
Cost Cost associated with the port.
Priority Priority associated with the port.