Filter
Top Products
Chapter 5 CLI – Layer 2
68 P332G-ML User’s Guide
Show rmon history Command
This command shows the most recent RMON history log for a given History Index.
The history index is defined using the rmon history command on Page 115 or
using an RMON management tool.
The syntax for this command is:
show rmon history [<History Index>]
Example:
P330-N> show rmon history 1026
history
Entry 1026 is active, owned by amir
Monitors ifEntry.1.1026 every 30 seconds
Requested # of time intervals, ie buckets, is 20
Granted # of time intervals, ie buckets, is 20
Sample # 1 began measuring at 2:53:9
Received 62545 octets, 642 packets,
391 broadcast and 145 multicast packets,
0 undersize and 0 oversize packets,
0 fragments and 0 jabbers,
0 CRC alignment errors and 0 collisions,
# of dropped packet events (due to a lack of resources): 0
Network utilization is estimated at 0
Show rmon alarm Command
This command shows the parameters set for a specific alarm entry that was set
using the rmon alarm command on Page 116 or using the P330 Device Manager.
The syntax for this command is:
show rmon alarm [<Alarm Index>]
Example:
P330-N> show rmon alarm 1026
alarm
alarm 1026 is active, owned by amir
Monitors ifEntry.1.1026 every 60 seconds
Taking delta samples, last value was 1712
Rising threshold is 10000, assigned to event # 1054
Falling threshold is 10, assigned to event # 1054
On startup enable rising or_falling alarms