Filter
Top Products
Chapter 6 CLI – Layer 3
142 P332G-ML User’s Guide
Example:
Router-1 (super)# sh ip reverse-arp 00:10:a4:98:97:e0
Showing 1 rows
Address MAC Address I/F Type TTL
--------------- ----------------- ----------- ------- --------
149.49.70.68 00:10:a4:98:97:e0 e-70 Dynamic 14355
show ip interface Command
Use the show ip interface command to display information for an IP interface.
The syntax for this command is:
show ip interface [<interface-name>]|<ip-address>|<vlan>]
Output Example:
interface-name The name of the interface whose information you
want to display.
ip-address The IP address of the interface whose information
you want to display.
vlan The name or ID of the VLAN over which there are
interfaces you want to display.
Showing 2 Interfaces
mgmt is administratively up
On vlan Default
Internet address is 10.49.54.14 , subnet mask is 255.255.255.0
Broadcast address is 10.49.54.255
Directed broadcast forwarding is disabled
Proxy ARP is disabled
baba is administratively down
On vlan v2
Internet address is 192.168.0.14 , subnet mask is 255.255.0.0
Broadcast address is 192.168.255.255
Directed broadcast forwarding is disabled
Proxy ARP is disabled