Filter
Top Products
Chapter 6 CLI – Layer 3
140 P332G-ML User’s Guide
Network Mask Interface Next-Hop Cost TTL Source
--------------- --------------- ------------ --------------- ----- --- -----
199.93.0.0 255.255.0.0 e-135new 135.64.76.1 1 n/a STAT-HI
show ip route static Command
Use this command to display the static routes.
The syntax for this command is:
show ip route static [<ip addr> [<mask>] ]
Example:
Router-1 (super)# sh ip route static
Showing 34 rows
Network Mask Interface Next-Hop Cost Pref Active
------------- ------------ --------------- --------------- ---- ---- ------
10.0.8.0 255.255.255.0 e-36 149.49.36.11 1 high Yes
135.0.0.0 255.0.0.0 e-135new 135.64.76.1 1 high Yes
135.64.0.0 255.255.0.0 e-135 135.87.164.1 1 high No
149.49.0.0 255.255.0.0 zevel 10.10.254.253 1 low Yes
149.49.2.0 255.255.255.0 n/a v-Route-FW 1 1 high Yes
show ip route summary
Use this command to display the number of routes known to the switch.
The syntax for this command is:
show ip route summary
Example:
Router-1 (super)# sh ip route summary
IP Route Summary:
Current number of routes: 69
ip-address The IP address of the routes
mask The ip mask of the routes.