Filter
Top Products
Chapter 6 CLI – Layer 3
P332G-ML User’s Guide 183
show ip access lists Command
Use the show ip access-lists command to see all the current policy lists.
The syntax for this command is:
Show ip access-lists[<policy-list-number>]
Example:
Router-N> show ip access-lists
show dscp Command
Use the show dscp command to see the DSCP table.
The syntax for this command is:
Show dscp[<dscp>]
policy-list-number The policy list number (integer from 100 to 199)
ip access-list 100 10 deny-and-notify tcp
192.168.55.0 0.0.0.255 range 5000 6000
any range 7000 8000
ip access-list 100 30 deny udp
any
any
optional
ip access-list 100 35 deny ip
any
any
ip access-list 100 55 fwd7 tcp
host 192.168.3.4 eq 33333
host 10.6.7.8
default action for list 100 is permit
dscp dscp entry