Filter
Top Products
Chapter 5 CLI – Layer 2
80 P332G-ML User’s Guide
Clear vlan Command
Use the clear vlan command to delete an existing VLAN and return ports from
this VLAN to the default VLAN #1. When you clear a VLAN, all ports assigned to
that VLAN are assigned to the default VLAN #1.
The syntax for this command is:
clear vlan <vlan-id>[name <vlan_name>]
Example:
This example shows how you can delete an existing VLAN (VLAN 5) from a
management domain:
P330-N# clear vlan 5 name V5
This command will assign all ports on vlan 5 to their default
in the entire management domain
- do you want to continue (Y/N)? y
All ports on vlan-id 5 assigned to default vlan.
VLAN 5 was deleted successfully.
Note: If you wish to define a name which includes spaces, you must enclose the
entire name in quotation marks, e.g. "new york".
Clear dynamic vlans Command
Use the clear dynamic vlans command to clear dynamic vlans. Only the
VLANs learned by the module from incoming traffic are cleared using this
command.
The syntax for this command is:
clear dynamic vlans
Example:
P330-N# clear dynamic vlans
This command will delete all the vlans that were dynamically
learned by the device - do you want to continue (Y/N)?
vlan_id Number of the VLAN (range is 1to 3071).
vlan_name VLAN name