Filter
Top Products
Chapter 5 CLI – Layer 2
P332G-ML User’s Guide 79
Clear ip route Command
Use the clear ip route command to delete IP routing table entries.
The syntax for this command is:
clear ip route <destination> <gateway>
Example:
To delete the route table entries using the clear ip route command:
P330-N# clear ip route 134.12.3.0 192.1.1.1
Route deleted.
Clear snmp trap Command
Use the clear snmp trap command to clear an entry from the SNMP trap
receiver table.
The syntax for this command is:
clear snmp trap {<rcvr_addr>|all}
Example:
P330-N# clear snmp trap 192.122.173.82
SNMP trap receiver deleted.
destination
IP address of the network, or specific host to be added
gateway IP address of the router.
rcvr_addr IP address or IP alias of the trap receiver (the SNMP management
station) to clear.
all Keyword that specifies every entry in the SNMP trap receiver table