Filter
Top Products
Chapter 5 CLI – Layer 2
P332G-ML User’s Guide 59
Example:
P330-N> show port flowcontrol 3/2
Port Send-Flowcontrol Receive-Flowcontrol
Admin Oper Admin Oper
------ ----- ---- ----- ----
3/2 off off off off
Output Fields
Show cam Command
Use the show cam commands to display the CAM table entries for a specific port.
Field Description
Port Module and port number
Send-
Flowcontrol-
Admin
Send flow-control administration. Possible settings:
• ON indicates that the local port is allowed to send flow
control frames to the far end.
• OFF indicates that the local port is not allowed to send flow
control frames to the far end.
Send-
Flowcontrol-
Oper
Send flow-control operation mode. Possible modes:
• ON indicates that the local port will send flow control frames
to the far end.
• OFF indicates that the local port will not send flow control
frames to the far end.
Receive-
Flowcontrol-
Admin
Receive flow-control administration. Possible settings:
• ON indicates that the local port will act upon flow control
indications if received from the far end.
• OFF indicates that the local port will discard flow control
frames if received from the far end.
Receive-
Flowcontrol-
Oper
Receive flow-control operation mode. Possible modes:
• ON indicates that the local port will act upon flow control
indications received from the far end.
• OFF indicates that the local port will discard flow control
frames received from the far end.