Filter
Top Products
Chapter 6 CLI – Layer 3
P332G-ML User’s Guide 147
Configure Mode
interface Command
Use the interface command to create and/or enter the Interface Configuration
Mode. Use the no form of this command to delete a specific IP interface.
The syntax for this command is:
[no] interface <interface name>
Example:
Router-N(configure)# interface marketing
Note: If you wish to define a name which includes spaces, you must enclose the
entire name in quotation marks, e.g. "new york".
ip default-gateway Command
Use the ip default-gateway command to define a default gateway (router).
The no form of this command removes the default gateway.
The syntax for this command is:
[no] ip default-gateway <ip-address>[<cost>][<preference>]
Example:
To define the router at address 192.168.37.1 as the default gateway.
Router-N(configure)# ip default-gateway 192.168.37.1
interface name String (up to 32 characters)
ip-address The IP address of the router.
cost The path cost. The default is 1
preference Preference, either High or Low. Default is Low.