Filter
Top Products
Chapter 6 CLI – Layer 3
P332G-ML User’s Guide 181
Example:
To add station 192.168.37.46 as a bootp/dhcp server to handle bootp/dhcp requests
arriving at the interface “marketing”:
Router-N(config-if:marketing)# ip bootp-dhcp server
192.168.37.46
ip bootp-dhcp network Command
Use the ip bootp-dhcp network command to select the network from which
the bootp/dhcp server shall allocate an address. This command is required only
when there are multiple interfaces over the VLAN. The no form of this command
restores to the default.
The syntax for this command is:
[no] ip bootp-dhcp network <ip-address>
Example:
To select the network 192.168.169.0 as the network from which an address shall be
allocated for bootp/dhcp requests:
Router-N(config-if:marketing)# ip bootp-dhcp network
192.168.169.0
ip-address The IP address of the network.