Filter
Top Products
208 D : Important safety and legal information
Declaration of Conformity for Products Marked with the FCC Logo (United States Only)
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
1 This device may not cause harmful interference.
2 This device must accept any interference received, including interference that may cause
undesired operation.
If you have questions about the product or this FCC declaration, write to:
Hewlett-Packard Company, 950 W. Maude Ave, Sunnyvale, CA 94085
For questions regarding this FCC declaration, call HP at 1-281-514-3333. For general
questions about the product, call 1-800-HP-INVENT (1-800-474-6836).
To identify your product, refer to the part, series, or model number located on the product.
Cables
To maintain compliance with FCC Rules and Regulations, connections to this device must be
made with shielded cables having metallic RFI/EMI connector hoods.
WARNING! Exposure to Radio Frequency (RF) Radiation The radiated output power
of this device is below the FCC radio frequency exposure limits. Nevertheless, the
device should be used in such a manner that the potential for human contact during
normal operation is minimized.
The exposure standard for wireless devices employs a unit of measurement known as the
Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/Kg. Tests for SAR
are conducted using standard operating positions accepted by the FCC with the device
transmitting at its highest certified power level in all tested frequency bands. Although the
SAR is determined at the highest certified power level, the actual SAR level of the device
while operating can be well below the maximum value. This is because the device is
designed to operate at multiple power levels so as to use only the power required to reach
the network. In general, the closer you are to a wireless base station antenna, the lower the
power output. To avoid the possibility of exceeding the FCC radio frequency exposure limits,
human proximity to the antenna should be minimized. This device has been tested and
demonstrated compliance when Bluetooth and WiFi are transmitting simultaneously. The
highest FCC SAR value for this device when tested for use at the body is 1.29 W/kg. This
device must not be co-located or operating in conjunction with any other antenna or
transmitter.
Battery replacement (for product with non removable battery)
Do not attempt to replace the rechargeable battery, the battery may only be replaced by HP
Authorized Service Provider.
Canada
Operation is subject to the following two conditions: (1) this device may not cause
interference, and (2) this device must accept any interference, including interference that
may cause undesired operation of the device.
L ‘utilisation de ce dispositif est autorisée seulement aux conditions suivantes : (1) il ne doit
pas produire de brouillage et (2) l’ utilisateur du dispositif doit étre prêt à accepter tout
brouillage radioélectrique reçu, même si ce brouillage est susceptible de compromettre le
fonctionnement du dispositif.
Canadian Notice/Avis Canadien
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing
Equipment Regulations.
Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le
matériel brouilleur du Canada.
European Union Notice
Products bearing the CE marking comply with the following EU Directives:
• Low Voltage Directive 2006/95/EC
• EMC Directive 2004/108/EC
CE compliance of this product is valid only if powered with the correct CE-marked AC
adapter provided by HP.
If this product has telecommunications functionality, it also complies with the essential
requirements of the following EU Directive:
• R&TTE Directive 1999/5/EC
Compliance with these directives implies conformity to harmonized European standards
(European Norms) that are listed in the EU Declaration of Conformity issued by HP for this
product or product family. This compliance is indicated by one of the following conformity
markings placed on the product.
• This CE marking is valid for non-telecommunications products and for EU harmonized
telecommunications products, such as Bluetooth
®
.
• This CE marking is valid for EU non-harmonized telecommunications products.
*If applicable, a notified body number is used. Refer to the regulatory label provided on this
product.
Hewlett-Packard GmbH, HQ-TRE, Herrenberger Strasse 140, D-71034 Böblingen, Germany
The telecommunications functionality of this product may be used in the following EU and
EFTA countries:
Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Liechtenstein, Lithuania,