NEC PD78058FY(A) Network Card User Manual


 
129
CHAPTER 6 PORT FUNCTIONS
P120 to P127 RTP0 to RTP7
P130 and P131 ANO0, ANO1
P70 SI2/RxD
P71 SO2/TxD
P72 SCK2/ASCK
Table 6-2. Port Functions (
µ
PD78058FY Subseries) (2/2)
Pin Name Function Alternate Function
P60 Port 6. N-ch open drain input/output port.
P61 8-bit input/output port. On-chip pull-up resistor can be specified by
P62 Input/output mode can be specified mask option. (Mask ROM version only).
P63 bit-wise. LEDs can be driven directly.
P64 If used as an input port, an on-chip pull-up RD
P65 resistor can be used by software. WR
P66 WAIT
P67 ASTB
Port 7.
3-bit input/output port.
Input/output mode can be specified bit-wise.
If used as an input port, an on-chip pull-up resistor can be used by software.
Port 12.
8-bit input/output port.
Input/output mode can be specified bit-wise.
If used as an input port, on-chip pull-up resistor can be used by software.
Port 13.
2-bit input/output port.
Input/output mode can be specified bit-wise.
If used as an input port, on-chip pull-up resistor can be used by software.
Cautions For pins which have alternate functions as port output (See 4.1.1 Normal operating mode pins,
(1) Port Pins), do not execute the following operations during A/D conversion. If performed,
then the general error standards cannot be maintained during A/D conversion.
<1> If it is used as a port, rewriting the output latch of its output.
<2> Even if it is not used as a port, changing the output level of pins used as outputs.