Filter
Top Products
502 AMD Geode™ LX Processors Data Book
Video Input Port Register Descriptions
33234H
6.10.2.18 VIP Task B VBI Odd Base/VBI Start (VIP_TASK_B_VBI_ODD_BASE_VBI_START)
6.10.2.19 VIP Task B Data Pitch/Vertical Start Even (VIP_TASK_B_DATA_PITCH_VERT_START_EVEN)
11:0 VBI_END VBI End. This register is redefined in BT.601 mode. In BT.601 type input modes, timing
is derived from the external HSYNC and VSYNC inputs. This value specifies what line
the VBI data ends in each field/frame. The end of VBI data is reached when the number
of lines from the falling edge of VSYNC equals this value. See Figure 6-48 "BT.601 Mode
Vertical Timing" on page 473 for additional detail.
VIP Memory Offset 44h
Typ e R /W
Reset Value 00000000h
VIP_TASK_B_VBI_EVEN_BASE_VBI_END Bit Descriptions (Continued)
Bit Name Description
VIP_TASK_B_VBI_ODD_BASE_VBI_START Register Map
313029282726252423222120191817161514131211109876543210
TASK_B_VBI_DATA_ODD_BASE_VBI_START (for 601 type modes)
VIP_TASK_B_VBI_ODD_BASE_VBI_START BIt Descriptions
Bit Name Description
31:0 TASK_B_VBI_
DATA_ODD_
BASE
Task B VBI Odd Base Address. This register specifies the base address in graphics
memory where VBI data for odd fields is stored. Changes to this register take effect at
the beginning of the next field. This value must be 32-byte aligned. (Bits [4:0] are
required to be 00000.)
Note: This register is double buffered. When a new value is written to this register, the
new value is placed in a special pending register, and the Base Register Not
Updated bit (VIP Memory Offset 08h[16]) is set to 1. The VBI Odd Base Address
register is not updated at this point. When the first data of the next field is cap-
tured, the pending values of all base registers are written to the appropriate base
registers, and the VBI Base Register Not Updated bit is cleared.
11:0 VBI_START VBI Start. This register is redefined in BT.601 mode. In BT.601 type input modes, timing
is derived from the external HSYNC and VSYNC inputs. This value specifies what line
the VBI data starts in each field/frame. The start of VBI data begins when the number of
lines from the leading edge of VSYNC equals this value. See Figure 6-48 "BT.601 Mode
Vertical Timing" on page 473 for additional detail.
VIP Memory Offset 48h
Typ e R /W
Reset Value 00000000h
VIP_TASK_B_DATA_PITCH_VERT_START_EVEN Register Map
313029282726252423222120191817161514131211109876543210
RSVD VERTICAL_END_EVEN TASK_B_DATA_PITCH_VERT_START_EVEN
VIP_TASK_B_DATA_PITCH_VERT_START_EVEN BIT Descriptions
Bit Name Description
31:28 RSVD Reserved.