Filter
Top Products
AMD Geode™ LX Processors Data Book 649
Instruction Set
33234H
8.3.4.4 RDM - Leave Debug Management Mode
Operation
Description
The RDM instruction restores the state of the processor from the DMM header, and then jumps to the address indicated in
the NEXT_IP field of the DMM header. Below is the format of the DMM header.
Flags Affected
All bits of the EFlags register is restored from the DMM header.
Opcode Instruction Clocks Description
0F 3A RDM 36 Return from DMI
31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
DR6 -4
DR7 -8
XDR6 -C
XDR7 -10
SS FLAGS SS SELECTOR -14
GB
0Av 0 1 DPL 1 0 E W A INDEX TI RPL
CS FLAGS CS SELECTOR -18
GD
0Av 01DPL11C
f
R A INDEX TI RPL
CS BASE -1C
0 CS LIMIT -20
CURRENT_IP -24
NEXT_IP -28
CR0 -2C
EFLAGS -30
0c
w
0c
r
0VX0HS0 0 0-34
TEMP6 -38
AC TEMP0 -3C
IF (CPL<>0 OR (DMM_INST_EN=0 AND SMM=0 AND DMM=0))
#UD;
ELSE
DR6 <= DMM_HEADR[DR6];
DR7 <= DMM_HEADER[DR7];
XDR6 <= DMM_HEADER[XDR6];
XDR7 <= DMM_HEADER[XDR7];
SS.FLAGS <= DMM_HEADER[SS.FLAGS];
SS.SELECTOR <= DMM_HEADER[SS.SELECTOR];
CPL <= DMM_HEADER[SS.DPL]
CS.FLAGS <= DMM_HEADER[CS.FLAGS];
CS.SELECTOR <= DMM_HEADER[CS.SELECTOR];
CS.BASE <= DMM_HEADER[CS.BASE];
CS.LIMIT <= DMM_HEADER[CS.LIMIT];
CR0 <= DMM_HEADER[CR0];
EFLAGS <= DMM_HEADER[EFLAGS];
DMM <= 0;
IF (DMM_HEADER[H])
HALT PROCESSOR;
ELSE
JUMP to CS at OFFSET of DMM_HEADER[NEXT_IP];