Filter
Top Products
6–22 Privileged Architecture Library Code
21264/EV68A Hardware Reference Manual
Performance Counter Support
For instructions that cause a trap, the last cycle in the window is the 2nd cycle after
the trap. Mispredicted branches are included in this category.
For nontrapping instructions that retire, the last cycle in the window is the 2nd
cycle after the instruction retires.
For instructions that abort, the last cycle in the window is the 2nd cycle after the
trap that caused the abort.
For instructions that are squashed (such as TRAPB), the last cycle in the window is
approximately the 2nd cycle after the squashed instruction would have aborted or
retired.
Every non-squashed valid fetched instruction either aborts or retires, but not both.
In either case, the instruction may also trap.
PCTR0 is disabled from counting until PCTR_CTL is next written.
5. Interrupt PALcode
When ISUM field PC[1:0] is set, execution of PCTR0's or PCTR1's interrupt PAL-
code is performed.
6. Operating system interrupt handler
The handler should first read the IPRs in Table 6–13 and then write PCTR_CTL to set
up the next interrupt.
Table 6–13 ProfileMe Mode Returned IPR Contents
IPR Name Relevant Fields Meaning
PMPC[63:0] All Profiled PC.
I_STAT ICM Instruction was in a new Icache fill stream.
TRP Instruction caused a trap and was not in the shadow of
a younger trapping instruction.
MIS Conditional branch mispredict.
TRAP TYPE Exception type code.
LSO Load-store order replay trap.
OVR Counter 0 overcount.
PCTR_CTL VAL Instruction retired valid.
TAK Branch direction if instruction is a conditional branch.
PM_STALLED Instruction stalled for at least one cycle between fetch
and map stages of pipeline.
PM_KILLED_BM Instruction killed during or before cycle in which it
was mapped.
PCTR0[19:0] Counter 0 value.
PCTR1[19:0] Counter 1 value.