Filter
Top Products
Index
Appendix
Introduction
Glossary
Contents
TOP
Loading
Documents
How to Use
ScandAll PRO
Scan Pa-
rameters
Various
Documents
Daily Care
Trouble-
shooting
Operational
Settings
Consumables
Scanner
Overview
Chapter 6 Daily Care
This chapter describes how to clean the scanner.
6.1 Cleaning Materials and Locations Requiring Cleaning.........115
6.2 Cleaning the ADF .................................................................117
6.3 Cleaning the Flatbed (Flatbed Type Only) ............................122
• When operating the scanner, the glasses inside the ADF
become very hot.
• Before you clean the inside of the scanner, turn off its power
and unplug the power cable from the power outlet. Wait for at
least 15 minutes for the ADF glasses to cool down.
• Before you clean the Feed Rollers and Eject Rollers, turn off
the power and unplug the AC adapter from the power outlet.
Wait for at least 15 minutes, then turn on the power again.
Do not use any aerosol sprays or alcohol based sprays to clean
the scanner. Dust blown up by strong air from the spray may
enter the inside of the scanner. This may cause the scanner to
fail or malfunction.
Sparks caused by static electricity, generated when blowing off
dust and dirt from the outside of the scanner, may cause a fire.