Fujitsu FI-6670A Scanner User Manual


 
Chapter 6 Daily Care
120
Index
Appendix
Introduction
Glossary
Contents
TOP
Loading
Documents
How to Use
ScandAll PRO
Scan Pa-
rameters
Various
Documents
Daily Care
Trouble-
shooting
Operational
Settings
Consumables
Scanner
Overview
Feed Rollers
The cleaning procedure is as follows:
1 With the power on, open the ADF when the Operator Panel indicates
a code other than "P."
Note that the Feed Rollers will not rotate if you open the ADF and do
the following action while "P" is indicated.
2 Hold down the [Send to] and [Scan/Stop] buttons simultaneously on
the Operator Panel. The Feed Rollers and Eject Rollers start to rotate
by a certain angle.
3 Hold a soft cloth moistened with Cleaner F1 against the surface of the
rotating Feed Rollers and Eject Rollers so that the cloth wipes off the
surface of the rollers lightly. Take particular care in cleaning these
rollers as black debris on them adversely affects the feeding perfor-
mance.
As a guideline, seven presses of the [Send to] and [Scan/Stop]
buttons together makes the Feed Rollers to rotate one full turn.
Both the Feed Rollers and Eject Rollers turn at
the same time. Do not touch the Feed Rollers
or Eject Rollers during cleaning if they are
rotating.
Feed Roller (x4)
Check
Function
Send to
Scan / Stop
Power
ADF type
[Send to] button
[Scan/Stop] button
Function Number Display
Check
Function
Send to
Power
Scan / Stop
Flatbed type
[Send to] button
[Scan/Stop] button
Function Number Display