Filter
Top Products
Chapter 1 Scanner Overview
32
Index
Appendix
Introduction
Glossary
Contents
TOP
Loading
Documents
How to Use
ScandAll PRO
Scan Pa-
rameters
Various
Documents
Daily Care
Trouble-
shooting
Operational
Settings
Consumables
Scanner
Overview
The Power Save mode is a state in which the powered
scanner is kept in a low-powered state if it has not been
operated for a certain period of time.
If no operation is performed on the scanner for 15 minutes, the
scanner automatically switches to the Power Save mode.
In the Power Save mode, the indication of the Function
Number Display on the Operator Panel goes out, but the
Power LED stays lit in green.
Returning from Power Save Mode
To return from Power Save mode, perform one of the following:
• Load some sheet of paper on the ADF Paper Chute.
• Hit any button on the Operator Panel. Do not press down the
[Power] button for more than 2 seconds. This will turn off the
scanner.
• Execute a command from the scanner driver.
1.5 Power Save Mode
You can change the time interval for switching to Power Save
mode by using the Software Operation Panel.
For details, refer to "Setting the Wait Time in Power Saving
Mode [Power saving]" (on page 187).