Filter
Top Products
Chapter 5 Various Documents
80
Index
Appendix
Introduction
Glossary
Contents
TOP
Loading
Documents
How to Use
ScandAll PRO
Scan Pa-
rameters
Various
Documents
Daily Care
Trouble-
shooting
Operational
Settings
Consumables
Scanner
Overview
• Original image
Color samples are displayed. Select a color to be dropped out.
• Dropout Image
The dropped out image is displayed.
• [Color 1], [Color 2], and [Color 3] tabs
Specify color(s) to be dropped out. Up to three colors can be
specified at the same time.
- [Dropout] checkbox
Select this checkbox on both the [Color 2] and [Color 3] tabs to
make this option effective when specifying two or more colors to
be dropped out.
- [Red]/[Green]/[Blue] fields
Under [Dropout Color], the specified color’s values and the sam-
ple color image are displayed.
You can change the color values by directly typing in or by using
the [ ] and/or [ ] buttons.
- Sample color
The color specified to be dropped out is shown here.
• [Priority Black] checkbox
Select this checkbox not to drop out text.
This option prevents low-intensity colors such as black, which are
generally used as text, from being dropped out.
• Sensitivity
For the color you selected, specify the allowable range of colors to
be dropped out.
Specifiable range: 15 to 180 degrees
The larger the numeric value, the wider the color dropout range is.
• [File] button
You can display a desired image file (in the format of *.bmp) in the
[Original image] area and select, from here, the color to be
dropped out.
• [Apply] button
Applies the changes made and closes the dialog box.
• [Cancel] button
Cancels the changes made and closes the dialog box.
5 Click the [OK] button.
⇒
You are returned to the [TWAIN Driver (32)] dialog box.
6 In the [TWAIN Driver (32)] dialog box, click the [OK]
button.
⇒
The changes made are saved.
7 From ScandAll PRO, perform a scan.
For how to perform a scan, refer to "Chapter 3 How to Use ScandAll
PRO" (on page 51).