Filter
Top Products
Chapter 9 Operational Settings
180
Index
Appendix
Introduction
Glossary
Contents
TOP
Loading
Documents
How to Use
ScandAll PRO
Scan Pa-
rameters
Various
Documents
Daily Care
Trouble-
shooting
Operational
Settings
Consumables
Scanner
Overview
Multifeed Detection
A "multifeed" is a feeding error that occurs when two or more
sheets in the ADF paper chute are fed simultaneously into the
scanner.
If you continue scanning document without knowing this multi-
feed error, you could skip some of important data while
scanning the document.
This scanner has the Multifeed Detection function to prevent
such troubles.
With the Multifeed Detection enabled, the scanner indicates
an error message and halts the scanning immediately at a
multifeed error.
Note that the Multifeed Detection is not available for the range
about 30 mm from the leading edge of document.
1 Start up the Software Operation Panel.
Refer to "9.1 Starting Up the Software Operation Panel" (on page
156).
2 From the tree listing on the left, select [Device Setting 2]
D [Multifeed].
3 Select one of the following detection methods.
9.5 Settings Related to Multifeed Detection
Detection Method Description
None Does not detect multifeeds.