Filter
Top Products
Chapter 1 Scanner Overview
22
Index
Appendix
Introduction
Glossary
Contents
TOP
Loading
Documents
How to Use
ScandAll PRO
Scan Pa-
rameters
Various
Documents
Daily Care
Trouble-
shooting
Operational
Settings
Consumables
Scanner
Overview
This section shows you the names of the scanner parts, and briefly describes how they function.
fi-6670/fi-6670A (ADF Type)
1.2 Scanner Parts and Their Functions
ADF (Automatic Document Feeder)
Feeds documents to the scanning position automatically.
Documents are fed sheet by sheet when loaded for batch
scanning. Both sides of documents can be scanned at
one time.
Paper Chute Extension
Extended when scanning long
documents.
Side Guide
Prevents documents from being
skewed during feeding. Adjust the
guide to the width of the document
loaded.
Side Guide Button
Adjusts the position of the Side
Guide when kept pressed. Locks the
Side Guide at the position when this
button is released.
Operator Panel
Comprises a Function Number Display, operating
push buttons, and LEDs. Used to operate the
scanner and monitor the status.
Two panels are mounted; one each on each side.
You can use whichever is convenient for you. The
panels are of quick-open type, and can be folded
back in place when not used.
Stacker
Scanned documents are ejected from the
ADF onto this stacker.
You can adjust the height of the stacker at
lower or upper position. Is removable.
Stacker Extension
Pull out this extension according to
the document length.
Stopper
Raise this if the documents
loaded are long.
EXT Connector
A connector for connecting to the
imprinter option.
For details of the imprinter option,
refer to the "Imprinter Operator’s
Guide."
ADF Paper Chute
Holds in place the document
pages/sheets that are to be fed into
the ADF. Load them with their face
down.
Chute Roller Cover
A cover to prevent your finger(s)
from being caught by the Chute
Roller.