Filter
Top Products
Chapter 8 Troubleshooting
143
Index
Appendix
Introduction
Glossary
Contents
TOP
Loading
Documents
How to Use
ScandAll PRO
Scan Pa-
rameters
Various
Documents
Daily Care
Trouble-
shooting
Operational
Settings
Consumables
Scanner
Overview
Vertical lines appear in scanned images.
Did you scan the document from the flatbed?
(Flatbed type)
YES
Clean the Document Bed of the Flatbed.
For how to clean the Document Bed, refer to "6.3 Cleaning the Flatbed (Flatbed
Type Only)" (on page 122).
NO
Are the upper/lower glasses and rollers inside the ADF
dirty?
YES
Clean the upper/lower glasses and rollers inside the ADF.
For how to clean the glasses and rollers, refer to "6.2 Cleaning the ADF" (on page
117).
NO
Is there any debris (paper powder or dust) on the docu-
ment?
YES
Remove the debris from the document.
Such debris on the document may be transferred onto the upper/lower glasses
and rollers inside the ADF or the Document Bed of the Flatbed, producing vertical
lines in the scanned images.
NO
If you cannot solve the problem after taking the measures above, check the items
shown in "8.4 Before Contacting Your Dealer or Scanner Service Provider" (on
page 152), and then contact the dealer where you purchased the scanner or an
authorized FUJITSU scanner service provider.