Filter
Top Products
Chapter 7 Consumables
124
Index
Appendix
Introduction
Glossary
Contents
TOP
Loading
Documents
How to Use
ScandAll PRO
Scan Pa-
rameters
Various
Documents
Daily Care
Trouble-
shooting
Operational
Settings
Consumables
Scanner
Overview
The following table shows the consumables and their standard
replacement cycles.
The consumables must be replaced periodically. Order new
consumables before the consumables on the scanner reach
the end of their service life. It is recommended that you keep a
stock of new consumables. By referring to the numbers of
scanned sheets counted at each replacement of the rollers
(Brake Roller and Pick Rollers), you can judge when you will
need to replace the rollers next time.
If you want to check the counted values for the rollers, refer to
"9.3 Settings Related to Consumables and Useful Life
Counters" (on page 165).
The replacement cycles above are rough guidelines for the
case of using A4/Letter-sized woodfree or wood containing
paper of 80 g/m
2
(21.0 lb) in weight. This cycle varies
according to the type of the paper used and how frequently
the scanner is used and cleaned.
To purchase the consumables, contact the store where you
purchased the scanner or an authorized FUJITSU scanner
service provider.
Please understand that some parts may need replacement by
service engineer depending on the scanned document type or
its duty of scannning. For further information, contact the
FUJITSU scanner service provider.
7.1 Consumables and the Replacement Cycles
Consumable Part No. Standard Replacement Cycle
Pick Roller PA03338-
K011
After scanning of 250,000
sheets or one year
Brake Roller PA03576-
K010
After scanning of 250,000
sheets or one year
Use only the specified consumables to avoid document feeding
troubles.