Fujitsu FI-6670A Scanner User Manual


 
Chapter 1 Scanner Overview
23
Index
Appendix
Introduction
Glossary
Contents
TOP
Loading
Documents
How to Use
ScandAll PRO
Scan Pa-
rameters
Various
Documents
Daily Care
Trouble-
shooting
Operational
Settings
Consumables
Scanner
Overview
USB Connector 1 (Common)
A connector for a USB interface cable.
SCSI Connector 1 (Common)
A connector for a SCSI interface cable.
SCSI ID Switch (Common)
Used to configure a SCSI ID (ID=5 by factory setting).
Cable Cover (Common)
A cover to house the cablings inside to protect them.
The cables are let out from either side of the cover to avoid tangling.
fi-6670
fi-6670A
CGA Board (fi-6670A only)
For details of the CGA board, refer to "A.4 Scanner Options" (on page 195).
SCSI Connector 2 (fi-6670A only)
A connector for a SCSI interface cable.
ADF Open Button (Common)
Opens the ADF. Push the buttons in to open the ADF.
USB Connector 2 (fi-6670A only)
A connector for a USB interface cable.
CGA Board Slot (fi-6670 only)
Remove the cover to install a CGA or optional board.
The fi-6670A mounts a CGA board.
For details of the CGA board, refer to "A.4 Scanner Options" (on page 195).
Main Power Switch (Common)
Used to turn the scanner ON and OFF.
Power Connector (Common)
A connector for a power cable.
Ventilation Port (Common)
An open port for ventilating hot air from inside the scanner.