Filter
Top Products
Chapter 4 Scan Parameters
64
Index
Appendix
Introduction
Glossary
Contents
TOP
Loading
Documents
How to Use
ScandAll PRO
Scan Pa-
rameters
Various
Documents
Daily Care
Trouble-
shooting
Operational
Settings
Consumables
Scanner
Overview
The FUJITSU TWAIN 32 scanner driver is a driver software
product that complies with the TWAIN standard. You can use
this driver to perform a scan using a TWAIN-supported
scanning application.
Usually, you first invoke a required scanner driver from the
scanning application and configure your scanning settings in
the scanner driver's setting dialog box. (Depending on the
application settings, this setting dialog box may not appear.)
In the FUJITSU TWAIN 32 scanner driver, you can configure
various scan settings in the dialog box above.
For the major scan parameters, see the description below.
For details, refer to the FUJITSU TWAIN 32 Scanner Driver
Help.
Resolution
Specify a resolution for scanning images.
You can select a value from the predefined standard resolu-
tions in the drop-down list. If a desired value is not listed, you
can select [Custom] to specify the value (in increments of 1 dpi
from 50 to 600 dpi).
By marking the [Predefine] checkbox, you can select one of
three predefined settings, [Best], [Better], and [Normal], and
this allows you to scan documents simply and quickly.
You can also customize the values of [Best], [Better], and
[Normal] as desired in the window that appears when the [...]
button is clicked.
Scan Type
Specify the side(s) of document to scan.
The specifiable scan types are as follows:
• ADF (Front Side)
• ADF (Duplex) (fi-6670/fi-6670A/fi-6770/fi-6770A only)
• ADF (Virtual Duplex) (fi-6750S only)
• Long page (Front Side)
• Long page (Duplex) (fi-6670/fi-6670A/fi-6770/fi-6770A only)
• Flat Bed (flatbed type only)
• ADF (Back Side) (fi-6670/fi-6670A/fi-6770/fi-6770A only)
4.1 FUJITSU TWAIN 32 Scanner Driver
How to invoke a scanner driver depends on the scanning
application you use.
For details, refer to the manual or help of the application you
use.