Ricoh CL3000 Printer User Manual


 
3
1. Options
Available Options
R
CAUTION:
By installing options, you can improve the printer performance and have an ex-
panded variety of features to use. For the specifications of each option, see the
Administrator Reference.
Option List
: Available option
*1
With Basic model, these cannot be installed at the same time
*2
With Network standard model, these cannot be attached at the same time.
When installing multiple options on the printer, we recommend the following
order of installation.
Important
The voltage rating of the connector for options is 24V DC or less.
Before installing options, the machine should be turned off and unplugged
for at least an hour. Components inside the machine become very hot, and
can cause a burn if touched.
Before moving the machine, unplug the power cable from the outlet. If the
cable is unplugged abruptly, it could become damaged. Damaged plugs or
cables can cause an electrical or fire hazard.
When lifting the machine, use the grips on both sides. The machine could
break or cause an injury if dropped.
Basic model Printer Network standard model
Printer
PAPER FEED UNIT Type
3000
❍❍
AD440 (Duplex Unit)
Memory Unit Type C
❍❍
Printer Hard Disk Type 3000
❍❍
1394 Interface Unit Type 4510
*1
*2
802.11b Interface Unit Type A
*1
*2
Bluetooth Interface Unit Type
A
*1
*2
Network Interface Board
Type 3000
*1
User Account Enhance Unit
Type B
❍❍
AresPGBOptionSetup-F_FM.book Page 3 Monday, July 29, 2002 1:12 PM