Filter
Top Products
Options
16
1
Printer Hard Disk Type 3000
R
CAUTION:
Important
❒ Before touching the Printer Hard
Disk, touch something metal to
discharge any static electricity.
Static electricity can damage the
Printer Hard Disk.
❒ Do not subject the Printer Hard
Disk to physical shocks.
A
AA
A
Check the contents of the package
for the following:
❖
❖❖
❖ Printer Hard Disk Type 3000
❖
❖❖
❖ Screw
B
BB
B
Turn off the power, and then un-
plug the power cable.
C
CC
C
Remove the two screws that fas-
ten the controller board on the
back of the printer.
The removed screws will be used
in step
H
to fasten the controller
board.
D
DD
D
While holding the handle, pull
out the controller board slowly.
The Printer Hard Disk is to be in-
stalled to the position shown in the
illustration.
• Do not touch the inside of the
controller board compartment. It
may cause a machine malfunc-
tion or a burn.
ZHBPD010E
ZHBP080E
ZHBP020E
ZHBP160E
AresPGBOptionSetup-F_FM.book Page 16 Monday, July 29, 2002 1:12 PM