Filter
Top Products
Operating Instructions Administrator Reference
199
Setting IEEE 802.11b
To make setting for IEEE 802.11b, use the wiconfig command.
Limitation
❒ You can make settings when installing the optional 802.11b Interface Unit.
❖
❖❖
❖ View settings
The following command displays the current IEEE 802.11b settings.
msh> wiconfig
The IEEE 802.11b card information is displayed.
msh> wiconfig cardinfo
Note
❒ If the IEEE 802.11b interface is not working correctly, the IEEE 802.11b card information is not
displayed.
❖
❖❖
❖ Configuration
msh> wiconfig parameter
Parameter Value to be configured
mode [ap|adhoc|802.11adhoc] You can set infrastructure mode (ap) , 802.11 ad hoc
mode(802.11adhoc) or ad hoc mode (adhoc).
The default is ad hoc mode.