Filter
Top Products
Options
4
1
❖
❖❖
❖ Option Installation Flow Chart
A
Attach the Paper Feed Unit.
(PAPER FEED UNIT Type 3000)
Attach the Paper Feed Unit to the bottom of the printer.
You can attach up to two Paper Feed Units.
T
B
Install the Duplex Unit.
(AD440)
Install the unit to the back of the front cover.
T
C
Install the SDRAM Module.
(Memory Unit Type C)
Install the module to the SDRAM module slot on the con-
troller board.
64MB, 128MB, and 256MB Memory Units are available.
T
D
Install the Printer Hard Disk.
(Printer Hard Disk Type 3000)
Install the Printer Hard Disk to the controller board.
T
E
Install the 1394 Interface Unit.
(1394 Interface Unit Type 4510)
Install the 1394 Interface Unit to the slot on the controller
board.
If you choose to install the 1394 Interface Unit, remove the
USB2.0 Interface Board and you cannot install the 802.11b
Interface Unit or Bluetooth Interface Unit.
T
F
Install the 802.11b Interface Unit
(802.11b Interface Unit Type A)
Install the 802.11b Interface Unit to the slot on the controller
board.
If you choose to install the 802.11b Interface Unit, remove
the USB2.0 Interface Board and you cannot install the 1394
Interface Unit or Bluetooth Interface Unit.
T
G
Install the Bluetooth Interface
Unit
(Bluetooth Interface Unit Type
A)
Install the Bluetooth Interface Unit to the slot on the control-
ler board.
If you choose to install the Bluetooth, remove the USB2.0 In-
terface Board and you cannot install the 802.11b Interface
Unit or 1394 Interface Unit.
T
H
Install the Network Interface
Board
(Network Interface Board Type
3000)
Install the Network Interface Board to the slot on the con-
troller board, only for basic model printer.
If you choose to install the Network Interface Board, you
cannot install the 1394 Interface Unit, 802.11b Interface Unit
or Bluetooth Interface Unit.
T
AresPGBOptionSetup-F_FM.book Page 4 Monday, July 29, 2002 1:12 PM