Filter
Top Products
Operating Instructions Administrator Reference
111
Web Browser
A
AA
A
Run the Web browser.
B
BB
B
Type the address "http:// (IP address of the printer you want to change the settings)".
The status of the selected printer is displayed on the Web browser.
C
CC
C
Click [Configuration].
A dialog box that prompts you to type the user name and a password appears.
D
DD
D
Type the user name and the password, and then click [OK].
Type only the password in this dialog box. The factory default password is "password".
E
EE
E
Change names and comments.
TCP/IP
A Click the [General] tab, and then type the name into the [Printer Name] box and comment
into the [Comment] box.
• In the [Printer Name] box, type the name of the printer within 13 characters. The factory de-
fault name consists of "RNP" and the last 3 bytes of the MAC address on the Network Inter-
face Board. For example, when the MAC address is 00:00:74:62:7D:D5, the factory default
name is "RNP627DD5". No name of 9 characters is permitted if the prefix is "RNP". Also,
when DHCP is selected as an IP address setting, the number of characters is limited to within
13 characters.
• In the [Comment] box, type any comment on printers within 31 characters.