Filter
Top Products
Operating Instructions Administrator Reference
221
Could not attach to FileServer<error number> (In remote printer mode) Cannot attach to the file server.
For some reason, the file server refuses the connection.
Check the file server configuration.
Could not attach to PServer<print server> (In remote printer mode) Cannot attach to the print server.
For some reason, the print server refuses the connection.
Check the print server configuration.
Current Interface Speed:xxxMbps The speed of the network (10 Mbps or 100 Mbps).
Current IP address <current IP address> The IP address <current IP address> was received from
the DHCP server.
Current IPX address<IPX address> The current IPX address.
DHCP lease time expired. DHCP lease time has expired. The printer tries to discov-
er the DHCP server again. The IP address used up to now
becomes invalid.
DHCP server not found. The DHCP server cannot be found. Make sure the DHCP
server is running on the network.
dhcpcd start. A dhcpcd (DHCP client service) has started.
Duplicate IP=<IP address>(from <MAC address>). The same IP address is used. An IP address must be
unique. Check the address of the device indicated in
<MAC address>.
Established SPX Connection with PServer,
(RPSocket=<socket number>, connID=
<connection ID>)
(In remote printer mode) A connection with the print
server has been established.
exiting lpd service has ended and the system is exiting the proc-
ess.
Message Description and Solutions