Filter
Top Products
802.11b Interface Unit Type A
29
1
G
GG
G
Press {
{{
{U
UU
U}
}}
} or {
{{
{T
TT
T}
}}
} to select the
transmission mode.
Note
❒ The factory default is “802.11
Ad hoc”.
❒ To use an IEEE 802.11b card for
which the SSID (Network
Name) setting is not necessary,
select "Ad hoc".
H
HH
H
Press {
{{
{Enter #}
}}
}.
The display returns to the previous
menu in a few seconds.
I
II
I
If "802.11 Ad hoc" or "Ad hoc" is
selected for "Comm. Mode", set
the channel to use for transmis-
sion.
Note
❒ Confirm the network adminis-
trator for the channel to use.
A Press {
{{
{U
UU
U}
}}
} or {
{{
{T
TT
T}
}}
} to display
"Channel".
B Press {
{{
{Enter #}
}}
}.
The channel currently used ap-
pears on the panel display.
C Press {
{{
{U
UU
U}
}}
} or {
{{
{T
TT
T}
}}
} to enter the
channel.
D Press {
{{
{Enter #}
}}
}.
J
JJ
J
Set "Trans. Speed" in the same
way.
Note
❒ The factory default is “Auto”. If
you need to change the trans-
mitting speed depending on en-
vironment you are using, select
the appropriate transmitting
speed.
K
KK
K
Press the {
{{
{U
UU
U}
}}
} or {
{{
{T
TT
T}
}}
} key to dis-
play "SSID", and then press the
{
{{
{Enter #}
}}
} key.
The following message appears on
the panel display.
Note
❒ The factory default is “ASSID”.
❒ If an SSID has been set, you can
check the set SSID. Press the
{
{{
{U
UU
U}
}}
} or {
{{
{T
TT
T}
}}
} key to display
"View", and then press the {
{{
{En-
ter #}
}}
} key.
A
Press the {
{{
{Enter #}
}}
} key.
The following message appears
on the panel display.
Note
❒ The value in brackets at the
upper right is the number of
characters entered.
IEEE 802.11b:
Channel
Channel:
(1-11) 11
IEEE 802.11b:
SSID
SSID:
Enter ID
SSID: [ 0]
k
AresPGBOptionSetup-F_FM.book Page 29 Monday, July 29, 2002 1:12 PM