Filter
Top Products
Options
10
1
J
JJ
J
Connect the Paper Feed Unit ca-
ble to the socket inside the printer
securely.
K
KK
K
Close the connector cover of the
printer.
To connect two Paper Feed Units,
connect the paper feed unit cable
to the socket inside the Paper Feed
Unit securely, and then close the
connector cover.
Note
❒ When moving or transporting
the printer, make sure to un-
plug the Paper Feed Unit con-
nector. For more information,
see "Moving and Transporting
the Printer" in the Maintenance
Guide.
Note
❒ After finishing installation, you
can check whether the Paper
Feed Unit is installed properly.
Print the configuration page
from the "List/Test Print"
menu. If it is installed properly,
you will see "Paper Feed Unit
(Tray 2)" or "Paper Feed Unit
(Tray 3)" under the "Options"
list.
❒ If the Paper Feed Unit is not in-
stalled properly, reinstall it
from step
C
. If you cannot in-
stall it properly even after at-
tempting reinstallation, contact
your sales or service representa-
tive.
Reference
For printing the configuration
page, see "Making Printer Set-
tings with the Control Panel" in
the Administrator Reference.
See "Loading Paper" in the
Maintenance Guide.
Important
❒ Before using the new Paper
Feed Unit, you must make set-
tings in the printer driver.
ZHBP370E
ZHBP380E
ZHBP390E
AresPGBOptionSetup-F_FM.book Page 10 Monday, July 29, 2002 1:12 PM