Filter
Top Products
Operating Instructions Administrator Reference
223
IEEE 802.11b <transmission mode> mode This is the IEEE 802.11b transmission mode.
• IEEE 802.11b [
infrastructure
] mode : in infrastructure
mode
• IEEE 802.11b [
802.11 ad hoc
] mode : in 802.11 adhoc
mode
• IEEE 802.11b [
ad hoc
] mode : in adhoc mode
IEEE 802.11b Tx Rate <Transfer Speed> The IEEE 802.11b transmitting speed (set speed) is dis-
played.
(Example: Current Tx Rate is 11Mbps.)
IEEE 802.11b Tx Rate 11Mbps
inetd start. An inetd has started.
<interface> started with IP: <IP address> <IP address> has been set for <Interface> and <Inter-
face> started.
<Interface>: Subnet overlap. Subnet from Netmask and the IP address you tried to set
for <Interface> overlap the subnet for another interface.
Set Subnet so that it does not overlap with another inter-
face.
IPP cancel-job: permission denied. The printer could not authenticate the name of the user at-
tempting to cancel a job.
ipp disable. Printing with ipp is disabled.
ipp enable. Printing with ipp is enabled.
IPP job canceled. jobid=%d. The spooled job has been canceled due to an error or by
user request.
Message Description and Solutions