Ricoh CL3000 Printer User Manual


 
Paper and Other Media Supported by This Printer
19
2
When printing on the reverse side of plain paper that has been already
printed on, load it on the Bypass Tray with print side down, and then select
[Plain:Dup. Back] with the control panel or the printer driver. Only the By-
pass Tray supports this function.
Thick Paper
Thick paper refers to paper between 106 g/m
2
(28.2 lb. Bond) to 165 g/m
2
(90 lb. Index).
Use the Bypass Tray and select the thick paper mode with the control panel
or printer driver. Tray 1 or Paper Feed Unit cannot be used.
Confirm that the top of the stack is not higher than the limit mark inside
the tray.
When printing on the reverse side of thick paper that has been already
printed on, load it on the Bypass Tray with print side down, and then select
[Thick:Dup. Back] with the control panel or the printer driver. Only the By-
pass Tray supports this function.
Note
The number of sheets to be set may vary depending on the paper thick-
ness and paper type.
There may be noise when printing on thick paper. This is not a malfunc-
tion.
Thin Paper
Thin paper refers to paper between 60g/m
2
(16 lb.Bond) to 70g/m
2
(19
lb.Bond).
Set the printer to Thin Paper mode using the control panel.
Reference
See Specifying a paper type or p.27 Specifying a paper type for the By-
pass Tray.
Glossy Paper
Glossy paper refers to paper 130 g/m2 (100 lb Text).
Use the Bypass Tray and select glossy paper mode with the printer driver.
Tray 1 or Paper Feed Unit cannot be used.
OHP transparencies
When printing on an OHP transparency that has a print side, be sure to print
on the print side. Otherwise, it may stick to the fusing unit and cause a paper
misfeed.
Print quality cannot be guaranteed if OHP transparencies other than the ones
recommended is used. For more information about recommended OHP
transparency, contact your sales or service representative.
Use the Bypass Tray. Tray 1 or Paper Feed Unit cannot be used.
The Bypass Tray can hold up to 50 sheets.
AresPGBMaintGuide-F_FM.book Page 19 Friday, July 26, 2002 5:17 PM