Filter
Top Products
Options
12
1
Note
❒ After finishing installation, you
can check whether the Duplex
Unit is installed properly. Print
the configuration page from the
"List/Test Print" menu. If it is
installed properly, you will see
"Duplex Unit" under the "Op-
tions" list.
❒ If the Duplex Unit is not in-
stalled properly, reinstall it
from step
C
. If you cannot in-
stall it properly even after at-
tempting reinstallation, contact
your sales or service representa-
tive.
Reference
See "Making Printer Settings
with the Control Panel" in the
Administrator Reference for
printing the configuration page.
Important
❒ Before using the Duplex Unit,
you must make settings in the
printer driver.
AresPGBOptionSetup-F_FM.book Page 12 Monday, July 29, 2002 1:12 PM