Filter
Top Products
Memory Unit Type C (SDRAM Module)
15
1
Note
❒ After finishing installation, you
can check whether the Memory
Unit is installed properly. Print
the configuration page from the
"List/Test Print" menu. If it is
installed properly, you will see
the memory capacity for "Total
Memory".
❒ If the Memory Unit is not in-
stalled properly, reinstall it
from step
A
. If you cannot in-
stall it properly even after at-
tempting reinstallation, contact
your sales or service representa-
tive.
Reference
For printing the configuration
page, see "Making Printer Set-
tings with the Control Panel" in
the Administrator Reference.
Important
❒ Before using the new Memory
Unit, you must make settings in
the printer driver.
AresPGBOptionSetup-F_FM.book Page 15 Monday, July 29, 2002 1:12 PM