Filter
Top Products
Operating Instructions Administrator Reference
226
sap enable, saptype=<SAP type>, sapname=<SAP name>
The SAP function has started. The SAP (SAP type and
SAP name) packet is issued to advertise the service on the
SAP table on the NetWare server.
Set context to <NDS context name> A <NDS context name> has been set.
shutdown signal received. network service rebooting... Rebooting the network service.
smbd start. (NetBEUI) An smbd (SMB (Server Message Block) service) has
started.
Snmp over ip is ready. Communication over TCP/IP with SNMP is available.
Snmp over IP over 1394 is ready.
Communication over IP over 1394 with SNMP is available.
Snmp over ipx is ready. Communication over IPX with SNMP is available.
snmpd start. SNMP service has started.
started. Direct print service has started.
The print server received error <error number> during at-
tempt to log in to the network.Access to the network was
denied.Verify that the print server name and password are
correct.
Cannot log in to the file server. The print server is not reg-
istered or the password is specified. Register the print
server without specifying a password.
win2kspd protocol-DOWN (APPEXIT). NVRAM setting ioctl (SPIO CAPPEXIT) of device
SBP2TSP was set by protocol-DOWN.
SCSI print is not receiving data.
win2kspd protocol-UP (APPENTRY). NVRAM setting ioctl (SPIO CAPPENTRY) of device
SBP2TSP was set by protocol-UP.
SCSI print is not receiving data.
win2kspd started. SCSI print (SBP-2) service has started.
Message Description and Solutions